4K UHD HDMI Extender Over Cat5e/6 with Bi-directional IR/PoC/ARC and Audio De-embedding up to 230ft
U.S.-based Company
.
Complimentary design services
and engineering support
and engineering support
.
3 year warranty
=
Overview
The BG-EXH-70C3 is an 18Gbps HDMI extender that can transmit HDMI and IR control signals up to 230ft(70m) via a single CAT6/6a cable and the uncompressed, long-distance transmission between the transmitter and receiver is achieved with zero-delay. These devices are also HDMI 2.0b and HDCP 2.2 compliant ensuring content is protected. The extenders feature bi-directional IR and power over cable(PoC) meaning only one of the units in the pair needs a power supply while IR blaster and receiver cables can be utilized to control devices on either end of the system simplifying a clean installation.
EDID copy pass-through between the source and display devices help to ensure the best signal quality possible. Video resolution is crystal clear with up to 4K2K@60Hz 4:4:4 along with rich colors provided by HDR, HDR10, HDR10+, Dolby Vision, and HLG. The receiving unit (RX) can extract LPCM 5.1, Dolby True HD, and DTS HD Master formats from the ARC connection on a display to its TOSLINK port. The flexible and compact design of the BG-EXH-70C3 allows for a wide range of uses where signal sources may need to be further away from their displays.
Features
HDMI Loop-out
Loop-out to view content locally at transmitter side
Bi-Directional IR
Control devices via IR either from the receiver or transmitter
HDCP 2.2
High-Bandwidth Digital Content Protection Supported
Rich Color Contrast
HDR, HDR10, HDR10+, Dolby Vision, and HLG supported
Stunning Image Quality
Crystal clear images at 4K 60Hz 4:4:4
Power Over Cable
Power only needs to be supplied to the either transmitter or receiver allowing for easier installation
Audio Formats: LPCM 5.1, Dolby True HD, DTS HD Master, Dolby 5.1, DTS 5.1, PCM 2.0
EDID copy pass-through
The receiving unit (RX) can extract the digital audio from the ARC connection on a display to its TOSLINK port
Tech Specifications
Technical
HDMI Compliance
HDMI 2.0b
HDCP Compliance
HDCP 2.2
Video Bandwidth
18Gbps
Video Resolution
Up to 4K2K@60Hz RGB/YCBCR 4:4:4
IR Level
5Vp-p
IR Frequency
Wideband 20K-60KHz
Transmission Distance
4K2K@60Hz 4:4:4–70m, 1080P–70m (CAT6/6a cable)
Color Space
RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth
8/10/12bit
HDR
HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Formats
HDMI: LPCM 5.1CH, Dolby True HD, DTS-HD Master Optical: Dolby 5.1, DTS 5.1, PCM 2.0
Transmitter
Input: 1× HDMI IN [Type A, 19-pin female]
Output: 1× HDMI OUT [Type A, 19-pin female] / 1× CAT OUT [RJ45]
Control:
1× SERVICE [Micro-USB jack]
1× IR IN [3.5mm Stereo Mini jack]
1× IR OUT [3.5mm Stereo Mini jack]
Receiver
Input: 1× CAT IN [RJ45]
Output: 1× HDMI OUT [Type A, 19-pin female] / 1× TOSLINK S/PDIF
Control:
1× SERVICE [Micro-USB jack]
1× IR IN [3.5mm Stereo Mini jack]
1× IR OUT [3.5mm Stereo Mini jack]
Housing
Metal Enclosure
Color
Black
Dimensions
Transmitter / Receiver: 3.5″ (W) x 2.7″ (D) x 0.7″ (H) [90mm (W)×68mm (D)×18mm (H)]
Weight
Transmitter: 5.64oz [160g], Receiver: 5.47oz [155g]
Power Supply
DC 12V/1A; Supported bi-directional PoC function
Power Consumption
3.36 W (max)
Operating Temperature
32°F ~ 104°F / 0°C ~ 40°C
Storage Temperature
-4°F ~ 140°F / -20°C ~ 60°C
Relative Humidity
20~90% RH (non-condensing)
Interfaces
1. SERVICE: Micro USB firmware update port.
2. HDMI OUT: HDMI signal loop output port. Connect to HDMI display devices with HDMI cable.
3. HDMI IN: HDMI signal input port. Connect to an HDMI source device with HDMI cable.
4. CAT IN: RJ45 connector for connecting the CAT OUT port of the Transmitter with CAT6/6a cable.
5. Link Indicator (Green): Solid: Transmitter and Receiver are in good connection status. Flashing: Transmitter and Receiver are in poor connection status. Dark: Transmitter and Receiver are not connected.
6. Data Indicator (Orange): Solid: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal.
7. IR IN: Connect to the IR receiver cable. The IR signal will be sent to the IR OUT port of the Transmitter.
8. IR OUT: Connect to the IR blaster cable, the IR signal is from IR IN port of the Transmitter.
10. EDID DIP switch: Use the DIP switch to set EDID.
11. CAT OUT: RJ45 connector for connecting the CAT IN port of the Receiver with CAT6/6a cable.
12. Link Indicator (Green): Solid: Transmitter and Receiver are in good connection status. Flashing: Transmitter and Receiver are in poor connection status. Dark: Transmitter and Receiver are not connected.
13. Data Indicator (Orange): Solid: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal.
9. DC 12V: DC 12V/1A power input port.
14. IR IN: Connect to IR receiver cable, the IR receive signal will emit to the IR OUT port of the Receiver.
15. IR OUT: Connect to IR blaster cable, the IR emit signal is from the IR IN port of the Receiver.
16. DC 12V: DC 12V/1A power input port.
17. SERVICE: Micro USB firmware update port.
18. HDMI OUT: HDMI signal output port. Connect to HDMI display devices with HDMI cable.
19. TOSLINK: Optical fiber audio output port. Connect the amplifier with an optical cable.
20. ARC DIP Switch: Use the DIP switch to enable ARC audio from a display to be extracted at the RX TOSLINK port.
PACKAGE CONTENTS
1 x 18Gbps HDMI Extender (Transmitter)
1 x 18Gbps HDMI Extender (Receiver)
1 x IR Blaster cable (1.5 meters)
1 x IR Wideband Receiver cable (1.5 meters)
4 x Mounting Ears
8 x Machine Screws (KM3*4)
1 x 12V/1A Locking Power Adapter
1 x User Manual
1 x IR Wideband Receiver cable (1.5 meters)